This manual content may have changed since this app was released. See below for latest version of the manual if you are having difficulties.

Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and maintaining your new RC10 Classic. Please take a moment to read through this manual to help familiarize yourself with these steps.

We are continually changing and improving our designs; therefore, actual parts may appear slightly different than in the illustrations. New parts will be noted on supplementary sheets located in the appropriate parts bags. Check each bag for these sheets before you start to build.

• Authentic replica of the RC10 Buggy Kit originally released in 1984
• Gold anodized 6061-T6 aluminum monocoque tub chassis
• Fully adjustable four wheel independent suspension
• Long travel, fluid filled gold anodized aluminum coil over shocks
• Low profile sealed six-gear transmission
• VariLok adjustable ball differential
• Exceptional ground clearance with low center of gravity
• Pro-Line® front and rear tires with modular racing wheels
• Fiberglass shock towers
• Oilite bushings throughout
• Fits 6-cell NiMh and 2S LiPo battery packs

Your new RC10 Classic comes as a kit. There are some items you will need to complete your kit (refer to catalog for suggestions):

• R/C two channel surface frequency radio system
• Electronic Speed Control (ESC)
• R/C Electric Motor
• Steering Servo and Servo Horn (AE # 9180, 89007)
• 2S, 7.4V Lipo stick battery or 7.2V NiMH battery
• Peak detection battery charger
• Pinion gear, size to be determined by type and wind of motor you use
• Retaining Ring Pliers
• Polycarbonate specific paint for body
• Thread Lock (AE # 1596)
• #2 Bit Type Phillips Screw Driver

Tools included:

• Allen wrenches #6950 (.050", 1/16", 3/32", 5/64")
• Allen wrench .035"
• Molded tools #6956
• Camber gauge #1719
• Shock building tool #6429

These items will be useful to have around when servicing your vehicle:

• Silicone Shock Fluid (Refer to catalog for complete listings)
• Body Scissors (AE Part #1737)
• FT Threadlock (#1596)
• FT Hex Wrenches (AE Part #1541, 1655)
• Reamer or Hole Punch
• FT Nut Drivers (AE Part #1561, 1663-1668)
• Calipers or a Precision Ruler
• FT Turnbuckle Wrench (#25384)
• Needle Nose Pliers
• Green Slime shock lube (AE Part #1105)
• Soldering Iron
• Wire cutters
• Hobby knife
• Tire Adhesive
• Wire cutters
• Multitool (AE Part 7494)

This symbol indicates a special note in the manual.